HakkoUSA Knowledge Base

Home
»
Knowledgebase
»
Accessories
»
Does the FT Series dip liner make the pins parallel to each...

Does the FT Series dip liner make the pins parallel to each other?

: 3 Months Ago
: Andy Chung
: Accessories

The HAKKO FT Series Liners only align the pins on each side of the component body that they are not bent inward or outward. The tool does not ensure the pitch between each pin on each side is equal.

On a scale of 1-5, please rate the helpfulness of this article

1 2 3 4 5

Not Helpful

Very Helpful

Optionally provide additional feedback to help us improve this article...

Thank you for your feedback!

Comment on this article

Still have questions? Submit a new ticket

Details

Article ID: 11999

Last Modified: 3 Months Ago

Last Modified By: Chris Stuber

Type: FAQ

Article not rated yet.

Article has been viewed 251 times.

Options

Print Article

Comments RSS

Export As PDF

Also In This Category

Restriction of Hazardous Substances (RoHS) Directive
What is the thread on the B2873 set screw?
Is the HJ3003 compatible with solvents?
What is the specification for the thumb screw used on the C1390C Omnivise?
Are CHP Tweezers non-magnetic?
How to change the display between °C and °F on the FG-100B and FG-101B
How do you determine the DOM (Date of Manufacture) for the Hakko FS-100 Tip Polishing Paste?
Why does a certificate of calibration come with the FG-101 and FG-101B and not the FG-100 or FG-100B?
Can a Hakko FG-100 or FG-101 be switched or converted from displaying temperature in degrees Celsius to displaying temperature in degrees Fahrenheit?

Search