HakkoUSA Knowledge Base

Home
»
Knowledgebase
»
Accessories
»
What is the specification for the thumb screw used on the C1390C...

What is the specification for the thumb screw used on the C1390C Omnivise?

: Last Year
: Chris Stuber
: Accessories

The thumbscrew used is a raised knurled-head thumbscrew that has a thread specification of M6-1.0 and is 12mm in length. The head has a diameter of 18mm.

On a scale of 1-5, please rate the helpfulness of this article

1 2 3 4 5

Not Helpful

Very Helpful

Optionally provide additional feedback to help us improve this article...

Thank you for your feedback!

Comment on this article

Still have questions? Submit a new ticket

Details

Article ID: 11976

Last Modified: Last Year

Last Modified By: Chris Stuber

Type: INFO

Article not rated yet.

Article has been viewed 406 times.

Options

Print Article

Comments RSS

Export As PDF

Also In This Category

Restriction of Hazardous Substances (RoHS) Directive
Does the FT Series dip liner make the pins parallel to each other?
What is the thread on the B2873 set screw?
Is the HJ3003 compatible with solvents?
Are CHP Tweezers non-magnetic?
How to change the display between °C and °F on the FG-100B and FG-101B
How do you determine the DOM (Date of Manufacture) for the Hakko FS-100 Tip Polishing Paste?
Why does a certificate of calibration come with the FG-101 and FG-101B and not the FG-100 or FG-100B?
Can a Hakko FG-100 or FG-101 be switched or converted from displaying temperature in degrees Celsius to displaying temperature in degrees Fahrenheit?

Search