The HMI software used by the HAKKO FR-1418
BGA Rework System is integrated with the firmware that is included in the PLC controllers used in the system design. Even if a new HMI software version is released, any upgrade will also require the upgrade of the firmware on the PLC controllers as well.
For reference, the following table shows the HMI version number and matched PLC firmware version:
| 1.3.5 | Hakko/PMT | V2 | n/a |
| 1.3.6 | Hakko | V2 | V3 |
| 1.3.7 | PMT | V4 | n/a |
| 1.3.8.2 | Hakko | V2 | V3 |
| 1.3.9 | Hakko | V2 | V3 |
| 1.3.9 | PMT | V4 | n/a |
| 1.3.9.1 | Hakko | V2 | V3 |
| 1.3.10 | Hakko | V2 | V3 |
| 1.5.5 | PMT | V3 | V6 |
| 1.5.6 | PMT | V4 | V7 |
| 1.5.7 | PMT | V4 | V8 |
| 1.5.8 | PMT | V4 | V8 |
| 1.5.10 | PMT | V6 | V9 |
| 1.5.10.1 | Hakko/PMT | V6 | V10 |
| 1.5.12 | Hakko/PMT | V6 | V10 |
| 1.5.13 | Hakko/PMT | V6 | V10 |
| 1.5.14 | Hakko/PMT | V7 | V10 |