HakkoUSA Knowledge Base

Home
»
Knowledgebase
»
CHP Brand
»
Electric Torque Drivers
»
Why is my USB flash drive not accessible to the ATX Controller?

Why is my USB flash drive not accessible to the ATX Controller?

: 7/30/2025 8:17:46 AM
: Chris Stuber
: Electric Torque Drivers

The ATX Controller has a USB Type A host port for connecting a barcode reader or USB flash drive. If you are connecting a USB flash drive for exporting or importing data, the flash drive needs to be formatted with a FAT32 file system and can be no larger than 32GB in size.

On a scale of 1-5, please rate the helpfulness of this article

1 2 3 4 5

Not Helpful

Very Helpful

Optionally provide additional feedback to help us improve this article...

Thank you for your feedback!

Comment on this article

Details

Article ID: 12404

Last Modified: 2 days ago @ 8:17 AM

Last Modified By: Chris Stuber

Type: INFO

Article not rated yet.

Article has been viewed 13 times.

Options

Print Article

Also In This Category

How to reset the calibration of the DPC Touch v2
What is the torque accuracy of the AT Series Brushless Drivers
Does the ATX Controller integrate with an Aegis Software MES system?
What is the life expectancy of the memory used in the ATX Controller?
Restriction of Hazardous Substances (RoHS) Directive
What is the expected service life of my CHP electric screwdriver?
DPF-200-E Noise Level Analysis
What type of PCB can be depanelized with the DPF-200?
How to calibrate the touch screen on the ATX Controller