HakkoUSA Knowledge Base

Do the handles of CHP Tools have Phthalates?

Purchased a 936-RC-B (936-13) soldering station. The unit works...

What is the shelf life for the FS-100?

What odors and/or substances can be adsorbed by Activated Carbon?...

How hot does the 557-V12, 200w iron get?

What is the maximum operating temperature for Loc-Line duct?

Can I use Li-ion batteries in my HAKKO FX-901 Cordless Soldering...

ESD Polyimide Tape Shelf Life

What is the operating temperature for the HAKKO RED (503)...

I have seen products that look just like Hakko products. Are...

FR-811 HMI v1.02

FR-1418 PLC2 v10 Firmware

How to reboot the firmware on a HAKKO FP-102 Soldering Station

FX-888 - Revision 20100831

FR-301 - Revision 20190401

How to Maximize Soldering Iron Tip Life

Can the filter A1001 be flip around to absorb more fumes.

What is the tiniest tip Hakko has for fine pitch rework? I find...

I was looking at your specs online for the HJ3100. I wanted to...

Can I use my HAKKO FX-1001 Soldering Iron Handpiece and T31...

Please mention the distance between the work station & smoke...

Why do the ends of new soldering iron tips in the package not...

Hi, just bought a 936 station. Within what range do these come...

What is the HAKKO FS-100 Tip Polish and how do I use it?

FX-888D - Revision 20191112

How do I reset the HAKKO FX-888D back to factory default...

What Hakko Products Do Not Require Calibration?

Do you have a conversion list for old 850-N-XX 850 nozzles to...

What are the different optimal soldering temperatures for...

How to turn off the Process Gate for the FM-202 when using T15...

FX-888D Setting and Adjustments

Standard Offsets for Composite Tips and Nozzles

Recommendations on Soldering Tip Selection

Why does the A1559 Sponge look different than the drawing in the...

I have a Hakko 926 Station and need replacement tips. What tips...

Do your products carry the WEEE marking?

How do T15 tips differ from the older tips for the FM-202 and why...

I have 936 models whch I now discover have been discontinued. I...

I have broken the heating element in my Hakko unit. How much do...

Calibration and Hot Air Rework Station Temperature

Can I use an ESD Safe iron with my non-ESD Hakko 936 Soldering...

Can the Hakko 807 pencil-style handpiece (PN: C1091) be used...

I have a 936 Station with a 907 iron. I bought some 900M...

Can I buy directly from you?

Do HAKKO or CHP products contain any materials that come from...

Why do certain HAKKO products not require calibration?

Can I use the FM202-01 for lead free solder?

We are currently using the HEPA filter 999-137 (HJ3100 fume...

Hakko 599B Tip Cleaner vs. The Sponge

What do the red and blue indicators mean on the HAKKO 191-211 and...