HakkoUSA Knowledge Base

How to remove the torque cover on AT-2000/3000/4000/4500

Min Xu
Assembly Tools

The torque covers on AT-2000/3000/4000/4500 electric screwdrivers has a two-piece design to provide better prevention against tampering of the torque setting.

To remove the torque cover, first loosen the set screw located at the end of the black cover with included allen key and remove the entire cover by turning it counterclockwise. Remove the Philips screw on the cover and push out the inner piece from the back end. Reinstall the remaining cover, and now you will have access to change the torque setting. 

For more information about CHP assembly tool or any other products from American Hakko, visit or contact us a 1-800-88-HAKKO(42556).

Also In This Category

On a scale of 1-5, please rate the helpfulness of this article

Not Helpful
Very Helpful
Optionally provide private feedback to help us improve this article...

Thank you for your feedback!

Still have questions - Submit a new ticket
Article ID: 11680
Last Modified: 3 Years Ago
Last Modified By: Min Xu
Article not rated yet.
Article has been viewed 1.5K times.