HakkoUSA Knowledge Base

HAKKO FR-811 File Down Load Error

Chris Stuber

When the HAKKO FR-811 is connected by USB cable to a PC running the HAKKO FR-811 HMI Software, and you attempt to upload a profile from the PC to the HAKKO FR-811, you may receive the following error on the FR-811 display:

This error is caused by a mismatch in the unit of measure for temperature between the FR-811 and the PC software. For example, the FR-811 is set to display temperatures in °C but the software is configured for settings in °F.

To resolve this problem, please make sure the PC software and the HAKKO FR-811 are set to use the same unit of measure for temperature.

Also In This Category

On a scale of 1-5, please rate the helpfulness of this article

Not Helpful
Very Helpful
Optionally provide private feedback to help us improve this article...

Thank you for your feedback!

Still have questions - Submit a new ticket
Article ID: 11666
Last Modified: 3 Years Ago
Last Modified By: Chris Stuber
Rated 1 star based on 1 vote
Article has been viewed 1.5K times.