HakkoUSA Knowledge Base

C5028/C5029 Grip Fixture and Hot Air Nozzle Compatibility

Hot Air Rework

C5028/C5029 grip fixtures are for use with Hakko's FR-810, FR-810B and FR-811 hot air units. These fixtures have been designed specifically for the new N51 series nozzles that are a different length the the older 850 series nozzles. More specifically, the C5028/C5029 grip fixtures are designed to attach to the C5027 board holder, and when used in this manner, there are a few older 850 series nozzles that may not be long enough to properly reflow components. The following nozzles may experience this:

  • A1475
  • A1476
  • A1477
  • A1478

​If attempting to use these nozzles with the C5028/C5029 fixtures, it is recommended to upgrade the nozzles to the N51 series.

Also In This Category

On a scale of 1-5, please rate the helpfulness of this article

Not Helpful
Very Helpful
Optionally provide private feedback to help us improve this article...

Thank you for your feedback!

Still have questions - Submit a new ticket
Article ID: 11665
Last Modified: 2 Years Ago
Last Modified By: Logan
Type: FAQ
Article not rated yet.
Article has been viewed 1.2K times.