HakkoUSA Knowledge Base

What are the maximum dimensions a custom 485 nozzle can be?

Hot Air Rework

A maximum solder flow capacity of the 485 solder pot is 40,0003 mm (W x D x H). The maximum height is 50mm. With the standard table (unmodified) the maximum width (W)  for a nozzle is 100mm and maximum depth (D) is 70mm. The minumum dimmensions are 5mm W and 4mm D . With a custom (modified) table nozzles can be manufactured to a maximum of 140mm W and 110mm D. See The attached pdf document for drawings and additional requirements.


Also In This Category

On a scale of 1-5, please rate the helpfulness of this article

Not Helpful
Very Helpful
Optionally provide private feedback to help us improve this article...

Thank you for your feedback!

Still have questions - Submit a new ticket
Article ID: 10333
Last Modified: 10 Years Ago
Last Modified By: AMitchell
Type: INFO
Rated 1 star based on 1 vote
Article has been viewed 5.5K times.