HakkoUSA Knowledge Base

I have a Hakko 926 Station and need replacement tips. What tips work with this iron?

Chris Stuber
General FAQs

The Hakko 926 Soldering Station was replaced with the Hakko 936 Soldering Station, however both stations use 900 Series Tips.  Depending on the iron you have with your station, you will use either 900L, 900M, or 900S tips.

If your iron has a small plastic retaining nut to hold the tip onto the iron, you are using a 900S iron and will need to use 900S Tips

If your iron has a series of holes in the metal enclosure near the metal nut that holds the tip onto the iron, you are using a 900L or 908 iron and will need to use 900L tips.

All other irons are 900M or 907 irons and use 900M tips. 

Also In This Category

On a scale of 1-5, please rate the helpfulness of this article

Not Helpful
Very Helpful
Optionally provide private feedback to help us improve this article...

Thank you for your feedback!

Still have questions - Submit a new ticket
Article ID: 10250
Last Modified: 11 Years Ago
Last Modified By: Chris Stuber
Type: INFO
Rated 3 stars based on 19 votes.
Article has been viewed 9.6K times.